Trinket Box. Cutting Parts (Caja de Chucherías. Cortando las Partes)
First step is to cut all the components and glue them together. I used the shown right-angle base to support the walls. The base of the box is 4"x4". Prior, I glued plates of 3-3/4" long by 1/2" wide (Qty=2) on the base inside the box for front and back and 2-3/4" long by 1/2" wide (Qty=2) for the sides. The plates keep a 1/8" clearance all around for the walls bottom rest. These provided support for the edges of the walls, improve the gluing and straightened the box. The front and back walls are 3-7/8"x4" and the side walls are 3-7/8"x3-3/4".
artgallery.LuisPrada.com
(El primer paso es cortar las componentes y pegarlas juntas. Usé la base de ángulo recto mostrada para apoyar las paredes. La base de la caja es de 4"x4". Previamente, pegué placas de 3-3/4" de largo por 1/2" de ancho (Cantidad=2) sobre la base adentro de la caja para el frente y atrás y de 2-3/4" de largo por 1/2" de ancho (Cantidad=2) para los lados. Las placas mantienen un espacio libre de 1/8" a todo el derredor para el descanso de las base de las paredes. Éstas suministran apoyo a los bordes de las paredes, mejoran el pegado y fortalecen la caja. Las paredes del frente y posterior son de 3-7/8"x4" y las paredes laterales son de 3-7/8"x3-3/4".)
artgallery.LuisPrada.com
- Author
- Luis Prada
- Created on
- Tuesday 10 October 2023
- Posted on
- Tuesday 17 October 2023
- Dimensions
- 4080*3060
- Filesize
- 4510 KB
- Visits
- 2242
0 comments